CT6210 Features:

• Miniature size
• Extremely high mirror speed positioning
• Wide Scanning angle of up to 60° optical (3mm aperture)
• Precision mounting eliminates optical re-alignment
• Low wobble and jitter
• Minimal power required
• Highest peak accelerations
• Rugged and reliable design
  

• Optical Apertures Supported, Two Axis: 3 mm.
• Recommended Inertial Load: 0.2 GM*CM ².
• Rotor Inertia: 0.02GM*CM ² ±10%
• Torque Constant: 2.5E+4 Dyne-cm/Amp ±10%
• Coil Resistance: 4.1 ±10% ohm
• Max. RMS/Peak Current: 1.6A.
• Small Angle Step Response: 0.175 mS, with balance inertia matched load
• Linearity: 99.5%, Min, over 40 Deg.
• Repeatability: 15 Microradians, Max.
• Length: 35.7mm (without mirror)
• Weight: 17g
  

Driver Board for Cambridge Technology 6210 scanners:

A fast dual servo scanning amplifier for Cambridge Technology 6800 or 6210 Scanners, extremely small dimensions and very high speed (up to 60,000 points per second at 7 degree angle).

Purchase as a set - includes either 2x CT6210's or 2x CT6800 with 1 Driver Amp, 2x cables and 1 mount for both the X & Y galvo.

For comparisons of both closed loop and open loop scan unit types please visit our scanning systems page.